From Box To Bathroom - The Essentials Of Shower Unit Installation

Check Us Out



Just how do you really feel when it comes to Simple ways to Install a Shower Cubicle on Your Own?


How to Install a One-Piece Shower Unit
A successful shower setup calls for careful planning and also a lot of work. For the most part, you will certainly need to do 3 sorts of tasks: framing wall surfaces, installing the plumbing, and completing wall surfaces.

Prep work


Firstly, you should pick the type of shower that you wish to set up. It is necessary to ascertain whether the picked shower is capable of dealing with specific systems and also can manage a safe level of water with the boiler. A lot of shower devices nowadays are designed to be flexible to different water pressures (such as kept warm water and also cold mains).
It is also essential to take into consideration the water stress and the planning of the piping as well as drain for the shower

Various Sorts Of Shower Units


  • Push-on Mixer: The tube and also spray parts of the push-on mixer shower device can be connected to the bath tap as per your demand, as well as the water temperature can be changed by means of the faucets. Push-on mixers are cheap as well as exceptionally basic to set up. Nevertheless, although the pipe link is straightforward, it is easily displaced. In addition, it is inconvenient to adjust the temperature.

  • Bath/Shower Mixer: The hose pipe and spray of this kind of shower are integrated with a bathroom mixer faucet, and also the temperature level can be readjusted through the bath taps. It is a very low-cost option and no extra plumbing is involved. However, the bath/shower mixers also suffer from inconvenient temperature control options.

  • Manual Mixer: The hose and also spray of a hand-operated mixer shower device belong of the wall surface system and the hot and cold water products are linked to a single valve The temperature level and stress of the water are regulated with either one or a variety of handles (in a lot more costly showers). Although temperature control is a lot easier in hands-on mixer types, they are a lot more expensive than the formerly pointed out mixers. They likewise require added plumbing of hot and cold water supply pipelines.

  • Thermostatic Mixer: The hose pipe and spray of this shower kind belong of the wall surface unit and also the hot and cold water supplies are linked to a single shutoff right here too. It is total with a built-in stabiliser to self-adjust the water temperature and to avoid it from becoming also hot. Among the biggest advantages of a thermostatic mixer shower kind includes convenient temperature level control. Nonetheless, it is the most pricey of the different mixer alternatives.

  • Power Shower: A power shower is a single device including an effective electrical pump that is capable of changing both the water stress as well as temperature level. This kind of shower can be fitted if there is water from a cold water cistern and also a hot water cyndrical tube. A power shower makes the adjustment of both pressure and also temperature simple. On the other hand, it disagrees for water heated straight by the shower or where the water is provided by a combination central heating boiler under keys pressure.

  • Electric Shower: An electrical shower is plumbed into a keys cold water supply and it warms the water electrically. It is essential to keep in mind that for this shower type to be mounted, the mains stress needs to be at the very least 0.7 kg/sq cm (10lb/sq in). The system allows the temperature level as well as pressure to be changed via a handle. Versions with temperature stabilisers are much better as they continue to be unaffected by various other taps in other places in operation within the home. A significant drawback of electric showers is that the control handle only allows for the choice of heats at much less pressure, or lower temperatures at a greater pressure. This is troublesome in the winter when the spray is usually weak and the mains water is chillier. Nevertheless, this trouble is taken on in some models which are available with a winter/summer setting.


  • Technique


    Depending upon the sort of shower you desire to mount, the shower head must either be fitted in order to avoid its contact with the water in the bath below or the base tray, or it has to have a check valve.
    Before starting, it is recommended to note the settings of the shower head and also control, and to plan the pipe-work included. In addition, the drainage system to remove the waste water will certainly require to be intended. Both positions of the cable television path as well as the shower button will certainly also need to be taken into consideration if a rapid or electric shower device is being mounted.
    Make use of the instruction guide provided with the shower unit to fit the shower control.Before fitting the pipes that will provide the water to the shower system, it is very important to remove the water. In order to shield the pipelines, they need to be offered a waterproof covering and likewise fitted with isolating valves. The pipelines can then be hidden right into the wall as well as smudged over to neaten the total look.
    Fit the base tray, shower head, and fittings.
    Link the primary shower control to the pipelines that will certainly be providing the water (This may require a female screw thread adapter).
    Reconnect the water system as well as examination the pipelines for any kind of leaks, as some may require tightening.
    If you are installing an electric shower, bear in mind to turn off the power supply prior to making any electrical connections. Once these links have actually been made (there must be advice within the user's manual), the power supply can be changed back on.

    Changing Water Stress to Fit Your Shower


    The cold water tank can be lifted to a higher height (occasionally as low as 150mm (6inches)) by fitting a strong wooden support beneath it - perhaps made up of struts and also blockboards. If you pick this choice, the primary as well as distribution pipes will additionally need to be elevated to satisfy the new height of the reservoir.
    Alternatively, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is picked, it needs to be linked into the power supply in order to operate.

    Piping and also Water drainage


    It is best to utilize 15mm diameter supply pipes, and also make the go to the shower as short and also straight as feasible so as to maintain optimal pressure and reduce heat loss. In addition, by minimising making use of elbow joints for pipe edges, you can reduce the resistance in the flow of the water. You can accomplish this by flexing the pipes instead.

    The Majority Of Typical Mistakes


  • Going against or neglecting regional code restrictions.

  • Making use of pipes that are too tiny.

  • Connecting copper to galvanized without using a brass or dielectric suitable in between the two.

  • Not using tape or pipe substance at threaded joints.

  • Uneven your fixtures when mounting them.

  • Not installing an air void filling up for fixtures.

  • Reducing supply stub outs too brief to install the shutoff valves onto after the ended up wall remains in location.

  • Not properly straightening tubes into fittings or stop shutoffs. (Forcing the nut onto the compression ring at an angle when the tubes goes to an angle will trigger a leak.).

  • When transforming the water back on in your home, always run the outdoors tube valve or flush your commodes to bleed dirt as well as air from the lines. This particles can cause issues in your sink taps and also other plumbing trim.



  • The best type of shower enclosure


    South India Agency (SIA), is a leading, fast-growing company that homes the best bathroom and hardware accessories of quality products, with an established and well-networked channel partners combined to provide unmatched service both for residential and commercial requirements, from wardrobe fittings and accessories to furniture accessories. SIA is known for innovative products from reputed Firms.



    When it is about your new bathroom fitting or upgrading one in the existing premises, think only to install the best accessories and fittings. Daily, you are going to use it to freshen up your day. It is something you’re going to use every day for the next couple of years. A place to rejuvenate yourself in the mornings and allow you to unfold after a long tiresome day. From wash basin to the minutest detail fittings for your bathroom needs like Tooth Brush Holders, Shelves, Soap Dishes, Baskets, Dispensers, Tumblers, Bathroom Ceiling Lights & Wall Lights, Exhaust Fans, toilet paper holders, etc are available here.



    Are you confused?



    You can visit SIA, take their opinion, and see the multiple solutions. A diverse range of best bathroom fittings is available.



    If you are looking for Shower enclosures, the right choice could be made from different types of shower enclosures like large showers to hinged shower enclosures depending on what suits your budget and the bathroom size. If the bathroom is spacious enough, then large and walk-in showers are preferred. On the contrary, smaller sizes of bathrooms can use quadrant corner shower enclosures, 3 Sided shower enclosures, Bifold shower enclosures or hinged shower enclosures, etc, which can be used based on the availability of space. SIA is well-known for its quality shower products, made with premium materials, ideal for creating high-quality bathrooms at an affordable price.



    Bathroom shower cubicles are made of thick glasses that are sturdy and leak-proof. They also are easy to maintain, strong, and heat resilient; making them equally safe for kids and adults. The cubicles are kept in place using chrome-plated brass fixtures, which are rust-free and elegant. Other materials that are used include plastic and thin waterproof materials for the shower screen.



    As cited here, there are different ranges of bathroom accessories in SIA and hence space in the bathroom is to be considered before purchasing any shower cubicles. Ideally, the shower enclosure could be near the bathtub, considering constraints of space. It can be in line with your bathroom style and other accessories. Sliding doors, when used in shower enclosures, are best suited for a rectangular bathroom where the allotted space is less. Sliding doors offer a comfortable bath without having to be concerned about the water splashing or spilling outside the enclosure.



    Choosing the right shower cubicle as per your budget and matching your bathroom needs are of prime importance. At South India Agencies we have a wide range of bathroom fittings and accessories. Finding the right shower cubicle that fits your budget should not be a problem. Shower cubicles from South India Agencies are pioneered with precision and can be tailor-made so that your bathroom space and size requirements are met. A shower cubicle enhances the look and feels of the bathroom and blends into the color scheme. Our display center in Bangalore is a one-stop shop for all your bathroom fittings and accessories.



    South India Agencies (SIA) is a Display Centre with a wide range of architectural and builders’ hardware associated with 80+ powerful brands, for all your requirements under one roof.

    https://southindiaagencies.com/blog/best-type-of-shower-enclosure/


    How to Install a Freestanding Shower Unit

    As a passionate reader about How to Install a Freestand, I thought sharing that blog post was a smart idea. Enjoyed our blog entry? Please share it. Help another person find it. Thanks a lot for your time spent reading it.




    Schedule Today


    Leave a Reply

    Your email address will not be published. Required fields are marked *